Power supply with interface: 4P * 1,6P * 1, P2 * 1
Applicable HP desktop and workstation power supply: PS-4321-9HA HP-D3201EO HP-D3201E0 D10-320P2A D12-320P1B DPS-320MB A CFH0320AWWA PS-4321-9HP DPS-320NB A DPS-320NB-1 A D12-320P1B and other models
Applicable models: For HP MT series (4000 4300 6000 6005 6080 6200 6280 6300 6380 8000 PC8022 8080 8100 8180 8200 8280 8300 8380 6380) and other models
HP Compaq 8200 DPS-320NB-1
HP 6200 Pro 8200 Elite MT Microtower
HP Elite 6200 8200 CMT
HP Compaq 6000
Note :Cable pin three interfaces, only applies to the original HP chassis motherboard, not compatible with ordinary motherboard

What should I pay attentiion to when using a notebook power adapter?

1, create a good cooling environment

When using the notebook in a high temperature environment, place the power adapter in a place that is not exposed to direct sunlight and ventilation; do not place the power adapter near the cooling air outlet of the notebook; at the same time, we can put the adapter on the side to make the heat more Well distributed.

2. If the voltage is unstable, it needs to be stopped in time.

Although the adapter is a wide-band operating voltage, it can be marked from 100V to 240V, but if it is used under extremely unstable voltage, it will also cause serious heat or damage to the power adapter.

If you need to temporarily borrow power from other brands, try to choose an adapter with the same or larger output current.

3. If an abnormality occurs, stop using it in time.

When you are not using the adapter, unplug the power cord. Prolonged power-up will keep the adapter working and will affect the end of life. When the power adapter emits large working noise or even smoke, it is often damaged or has a fault. It should be stopped immediately and can be used again after being repaired by professional engineers.