MODEL NO : SPI400U4BB FSP400-601UG FSP400-70LQ
AC INPUT : 100-240V-8-4A,60-50Hz
MAX.OUTPUT POWER : 400W(+3.3V & +5V=120W MAX)(+12V1 & +12V2 & +12V3=30A MAX)
DC OUTPUT : +3.3V==20.0A(ORG).+5V==20.0A(RED),+12V1==16.0A(YEL)
+5Vsb==3.0A(PURP),-12V==0.5A(BLUE)
P.G SIGNAL(GRAY),GROUND(BLACK)
Dimension : 220mm (L) * 100 mm (W) * 40mm (H)
Product Highlight Efficiency Level 80 Plus Gold
Interface:
24 needle length: 60 cm
Dual 4-pin CPU power supply cable length: 46 cm
8-pin CPU for the cable length: 21 cm
Two IDE cable lengths are: 27 and 31 cm.
(Need to use SATA interface or extension cord length, or change the interface
cable, please contact customer service

What should I pay attentiion to when using a notebook power adapter?

1, create a good cooling environment

When using the notebook in a high temperature environment, place the power adapter in a place that is not exposed to direct sunlight and ventilation; do not place the power adapter near the cooling air outlet of the notebook; at the same time, we can put the adapter on the side to make the heat more Well distributed.

2. If the voltage is unstable, it needs to be stopped in time.

Although the adapter is a wide-band operating voltage, it can be marked from 100V to 240V, but if it is used under extremely unstable voltage, it will also cause serious heat or damage to the power adapter.

If you need to temporarily borrow power from other brands, try to choose an adapter with the same or larger output current.

3. If an abnormality occurs, stop using it in time.

When you are not using the adapter, unplug the power cord. Prolonged power-up will keep the adapter working and will affect the end of life. When the power adapter emits large working noise or even smoke, it is often damaged or has a fault. It should be stopped immediately and can be used again after being repaired by professional engineers.